TA Triumph-Adler P-C3065 MFP - Manual (Page 161)

9-5
Troubleshooting > Messages
Load paper in cassette #.
↑↓ (Displayed alternately)
Press OK to continue using
cassette #. Is the indicated cassette out of
paper? Load paper.
Select [Paper] to select the other paper
source. Select the [OK] key to print on the
paper in the currently selected paper
source. ―
Load paper in cassette #.
↑↓ (Displayed alternately)
Set selected size paper and
press [OK]. Is the indicated cassette out of
paper? Load paper.
Select [Paper] to select the other paper
source. ―
Machine failure. Call service. ― An error has occurred in the machine.
Make a note of the error code displayed
on the message display, and contact your
service representative.
―
Maximum number of scanned
pages. Job is canceled. Is the acceptable scanning count
exceeded? Cannot scan pages any more. Job is
canceled. Select [OK].
—
Polling box limit exceeded.
Job is canceled. Is [OK] displayed on the screen? The specified box is full, and no further
storage is available; Job is canceled.
Select [OK]. Try to perform the job again
after printing or deleting data from the box.
—
Scanner memory is full. Job is
canceled. — Scanning cannot be performed any more
due to insufficient memory. The job is
canceled. Select [OK]. —
The phone receiver is
off the hook. Hang Up. — Put down the receiver. —
Message Checkpoint Corrective Action
Reference
Page