TA Triumph-Adler P-C3065 MFP - Manual (Page 64)

4-6
Receiving Faxes > Fax reception settings
Fax reception settings
Duplex Printing
When received multiple pages of data are the same width, they can be printed out on both sides of paper having the
same width as the data.
For more information about configuring settings, refer to the following:
2 in 1 Print
When you receive a multi-page Statement or A5 size original, this function prints 2 pages of the original at a time on one
Letter or A4 size sheet of paper. If you specify 2 in 1 reception and duplex printing at the same time, 2 in 1 reception is
disabled.
For more information about configuring settings, refer to the following:
Batch Print
When a multi-page fax is received, the pages are printed in a batch after all pages are received.
For more information about configuring settings, refer to the following:
RX Date/Time
Reception Date/Time function adds the reception date/time, sender information and number of pages on the top of each
page when the message is printed out. It is useful for confirming the time of reception if the fax is from a different time zone.
For more information about configuring settings, refer to the following:
On Print on both sides.
Off Do not print on both sides.
Default fax settings (page 8-2)
On Print 2 in 1.
Off Do not print 2 in 1.
Default fax settings (page 8-2)
On Print as a batch after all pages are received.
Off Print each page as it is received.
Default fax settings (page 8-2)
NOTE
When the received data is printed on multiple pages, the reception date/time is printed on
the fist page only. It is not printed on the pages that follow. When the received fax data is
forwarded after retrieving it from memory, the reception date/time is not added to the
forwarded data.
On Print the reception date/time.
Off Do not print the reception date/time.
Default fax settings (page 8-2)