TA Triumph-Adler P-C3065 MFP - Manual (Page 152)

8-15
Fax Settings > Transmission Restriction
Setting Reception Restriction
Restrict incoming faxes so that you only receive originals from senders registered in Permit FAX No. and Permit ID No.
and senders registered in your Address Book. This mode also allows you to set a [Reject List] for Reception Restriction
so that reception from senders on the list of Rejected FAX numbers or from senders whose Local FAX Number is not
registered are rejected. (You can select whether reception from a party whose local fax number is not registered is
allowed or rejected in “Unknown Number Reception”.)
Unknown Number Reception (page 8-15)
To change the reception restriction, follow the steps below.
1
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key >
[TX/RX Restrict.] > [OK] key > [▲] [▼] key > [RX Restriction] > [OK] key
2
Configure the function.
[Off], [Permit+Addr Book] or [Reject List] > [OK] key
To restrict the other parties from which you receive originals only to the ones registered in
Permit FAX No. and Permit ID No. as well as the ones registered in the Address Book, select
[Permit + Addr Book].
To block incoming faxes from senders registered in Reject FAX No., select [Reject List].
Unknown Number Reception
Select whether to receive the fax of that the number is unknown when [Reject List] is set for Reception Restriction.
To change the reception restriction for the unknown fax number, follow the steps below.
1
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key >
[TX/RX Restrict.] > [OK] key > [▲] [▼] key > [UnknownNumber RX] > [OK] key
2
Configure the function.
[Prohibit] or [Permit] > [OK] key
To receive faxes from the unknown number, select [Permit].
To reject faxes from the unknown number, select [Prohibit].