Setting the encrypted reception, Setting the encrypted reception -24 – TA Triumph-Adler P-C3065 MFP User Manual
Page 89
5-24
Using Convenient Fax Functions > Encryption
7
Finish the encrypted transmission settings.
Select the [OK] key.
8
Send Start
Press the [Start] key.
The transmission will start.
Setting the Encrypted Reception
To conduct encryption communication operating the receiving system, follow the steps below.
1
Register the encryption key ahead of time.
Register the encryption key that you decided upon with the sender.
For the procedure for registering an encryption key, refer to the following:
2
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key > [Reception] >
[OK] key > [▲] [▼] key > [Encryption RX] > [OK] key
3
Turn on encrypted reception.
1
[On] > [OK] key
2
Select the encryption key number that you used to register the encryption key that you
decided upon with the sender.
3
Select the [OK] key.
The machine receives the encrypted originals from the sender of the specified encryption
key.
NOTE
When On is selected in Check beforeSend, a destination confirmation screen is displayed
when you press the [Start] key.