Interrupt send, Interrupt send -23 – TA Triumph-Adler P-C3065 MFP User Manual

Page 54

Advertising
background image

3-23

Sending Faxes > Interrupt Send

Interrupt Send

During communication, when you scan originals by selecting direct transmission, you can use interrupt send. Even when
the communication is prolonged due to broadcast transmission or a next transmission being scheduled, the machine will
first send originals for which interrupt send has been set.

1

Select the [FAX] key.

2

Load the originals to be sent using Interrupt Send.

3

[Function Menu] key > [▲] [▼] key > [FAX Direct TX] > [OK] key >
[▲] [▼] key > [On] > [OK] key.

For operation of direct transmission, refer to the following:

4

Set the destination, and press the [Start] key.

The originals are left in queue, and the transmission will start when transmission becomes
possible.

5

When the interrupt send is completed, the canceled communication and
standby transmission will automatically resume.

NOTE

When the total number of standby transmissions and delayed transmissions has already reached 35, you cannot use
interrupt send.

FAX Direct Transmission (page 3-19)

NOTE

When On is selected in Check beforeSend, a destination confirmation screen is displayed
when you press the [Start] key.

Confirmation Screen of Destinations (page 7-11)

To cancel transmission while waiting for interrupt send, select the [Stop] key on the
operation panel.

Cancelling Direct Transmission (page 3-19)

Advertising