Permissions required to run cli – Avago Technologies 3ware SAS 9750-16i4e User Manual
Page 13
Installing the 3ware CLI
www.lsi.com/channel/products
5
c
Respond to each screen as the script walks you through the
installation.
d
After the installation is complete, check that the software was
installed correctly.
For OpenSolaris
a
Navigate to the following directory on the 3ware CD:
/packages/installers/tools/OpenSolaris
b
Type:
./setupSolaris_x86.bin
c
Press
Enter
to begin installation.
d
After the installation is complete, check that the software was
installed correctly.
For VMWare
a
Navigate to the following directory on the 3ware CD:
/packages/installers/tools/vmware/esx40/
b
Type:
rpm -ivh <LSI-3ware-CommandLine-Management-Utility-
xxx.rpm>
c
Press
Enter
to begin installation.
d
After the installation is complete, check that the software was
installed correctly.
Permissions Required to Run CLI
To run CLI, you must be logged on with one of the following sets of
permissions:
•
Administrator
•
Root
To start CLI
•
In a Terminal window, type
tw_cli
- 3ware SAS 9750-24i4e 3ware SAS 9750-4i 3ware SAS 9750-4i4e 3ware SAS 9750-8e 3ware SAS 9750-8i 3ware 8006-2LP 3ware 8006-2LP (Channel) 3ware 9550SXU-4LP 3ware 9550SXU-4LP (Channel) 3ware 9550SXU-8LP 3ware 9550SXU-8LP (Channel) 3ware 9650SE-12ML 3ware 9650SE-12ML (Channel) 3ware 9650SE-16ML 3ware 9650SE-16ML (Channel) 3ware 9650SE-24M8 3ware 9650SE-24M8 (Channel) 3ware 9650SE-2LP 3ware 9650SE-2LP (Channel) 3ware 9650SE-4LPML 3ware 9650SE-4LPML (Channel) 3ware 9650SE-8LPML 3ware 9650SE-8LPML (Channel) 3ware 9690SA-4I 3ware 9690SA-4I (Channel) 3ware 9690SA-4I4E 3ware 9690SA-4I4E (Channel) 3ware 9690SA-8E 3ware 9690SA-8E (Channel) 3ware 9690SA-8I 3ware 9690SA-8I (Channel)