Avago Technologies 3ware SAS 9750-16i4e User Manual
Page 28
Chapter 2. CLI Syntax Reference
20
3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.2
Update controller with new
firmware
/cx update
Add a time slot to a rebuild
schedule
/cx add rebuild
Add a time slot to a verify
schedule
/cx add verify
Add a time slot to a selftest
schedule
/cx add selftest
Enable/disable the initialize/
rebuild/migrate schedule and set
the task rate
/cx set rebuild
Enable/disable the verify schedule
and set the task rate
/cx set verify
Set the verify schedule to
advanced or basic
/cx set
verify=advanced|basic|1..5
Set the rebuild/migrate task rate
/cx set rebuildrate
Set the rebuild/migrate task mode
/cx set rebuildmode
Set the verify task rate
/cx set verifyrate
Set the verify task mode
/cx set verifymode
Set the basic verify start time and
day
/cx set verify=basic [pref=ddd:hh]
Enable/disable the selftest
schedule
/cx set selftest
View controller alarms (errors,
warnings, messages)
/cx show alarms
/cx show events
/cx show AENs
Unit Configuration Tasks
View information about a unit
Create a unit or hot spare
/cx add
Enable/disable unit write cache
/cx/ux set wrcache
Enable Basic or Intelligent read
cache, or disable both.
/cx/ux set rdcache
Set the queue policy
/cx/ux set qpolicy
Set the rapid RAID recovery policy
/cx/ux set rapidrecovery
Table 5: Common Tasks Mapped to CLI Commands (Continued)
Task
CLI Command
Page