Show events [reverse, Show aens [reverse, Show diag – Avago Technologies 3ware SAS 9750-16i4e User Manual
Page 36: Show rebuild
Chapter 2. CLI Syntax Reference
28
3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.2
show events [reverse]
The show events command is the same as “show alarms [reverse]”. Please see
above for details.
show AENs [reverse]
The show AENS command is the same as “show alarms [reverse]”. Please see
above for details.
show diag
The show diag command shows the diagnostic information for all controllers
in the system. The enclosure diagnostic log might be requested by 3ware
Customer Support to troubleshoot problems on your controller.
show rebuild
The show rebuild command shows all rebuild schedules for the 3ware RAID
controllers in the system.
Example:
//localhost> show rebuild
Rebuild Schedule for Controller /c0
========================================================
Slot
Day
Hour
Duration
Status
--------------------------------------------------------
1
Sun
12:00am
24 hr(s)
disabled
2
Mon
12:00am
24 hr(s)
disabled
3
Tue
12:00am
24 hr(s)
disabled
4
Wed
12:00am
24 hr(s)
disabled
5
Thu
12:00am
24 hr(s)
disabled
6
Fri
12:00am
24 hr(s)
disabled
7
Sat
12:00am
24 hr(s)
disabled
For additional information about rebuild schedules, see “/cx add
rebuild=ddd:hh:duration” on page 59, and refer to the discussion of
background tasks and schedules in 3ware SATA+SAS RAID Controller Card
Software User Guide, Version 10.2.