Cli syntax reference, Common tasks mapped to cli commands, Chapter 2 – Avago Technologies 3ware SAS 9750-16i4e User Manual
Page 27: Cli syntax reference chapte
19
3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.2
2
CLI Syntax Reference
This chapter provides detailed information about using the command syntax
for the 3ware CLI.
Throughout this chapter, the examples shown use the interactive mode of
using the 3ware CLI.
Common Tasks Mapped to CLI Commands
The table below lists many of the tasks that you can use to manage your RAID
controllers and units, and also lists the primary CLI command associated with
those tasks.
Table 5: Common Tasks Mapped to CLI Commands
Task
CLI Command
Page
Controller Configuration Tasks
View information about a controller
/cx show
View controller policies and other
details
/cx show [attribute] [attribute]
View drive performance statistics
/cx show dpmstat
[type=inst|ra|ext]
Set policies for a controller
•
Modify staggered spinup
•
Enable/disable autocarving
•
Enable/disable autorebuild
•
Set the autocarve volume size
•
Enable/disable drive
performance monitoring
statistics (dpmstat)
/cx set stagger and /cx set spinup
/cx set autocarve
/cx set autorebuild
/cx set carvesize
/cx set dpmstat
Controller Maintenance Tasks