C x show firmware, C x show model – Avago Technologies 3ware SAS 9750-16i4e User Manual
Page 47
Controller Object Commands
www.lsi.com/channel/products
39
p18 OK u0 34.18 GB SAS - /c2/e1/slt7 HITACHI HUS151436VL
p19 OK u0 34.18 GB SAS - /c2/e1/slt8 HITACHI HUS151436VL
p20 OK u0 34.18 GB SAS - /c2/e1/slt9 HITACHI HUS151436VL
p21 OK u0 34.18 GB SAS - /c2/e1/slt10 HITACHI HUS151436VL
p22 OK u0 34.25 GB SAS - /c2/e0/slt11 MAXTOR ATLAS15K2_36
p23 OK u0 34.25 GB SAS - /c2/e0/slt12 MAXTOR ATLAS15K2_36
p24 OK - 34.25 GB SAS - /c2/e0/slt13 MAXTOR ATLAS15K2_36
p25 OK - 34.25 GB SAS - /c2/e0/slt14 MAXTOR ATLAS15K2_36
p26 OK - 34.18 GB SAS - /c2/e1/slt11 HITACHI HUS151436VL
p27 OK - 34.18 GB SAS - /c2/e1/slt12 HITACHI HUS151436VL
p28 OK - 34.18 GB SAS - /c2/e1/slt13 HITACHI HUS151436VL
p29 OK - 34.18 GB SAS - /c2/e1/slt14 HITACHI HUS151436VL
p30 OK - 34.25 GB SAS - /c2/e0/slt15 MAXTOR ATLAS15K2_36
p31 OK - 34.18 GB SAS - /c2/e1/slt15 HITACHI HUS151436VL
/cx show firmware
The /cx show firmware command shows the firmware version of controller
/cx.
Example:
//localhost> /c0 show firmware
/c0 Firmware Version = FE9X 3.03.06.X03
/cx show memory
The /cx show memory command shows the available memory on the
controller.
Example:
//localhost> /c2 show memory
/c2 Available Memory = 448MB
/cx show model
The /cx show model command shows the controller model of controller /cx.
Example:
//localhost> /c0 show model
/c0 Model = 9690SA-8E
Note:
Some memory is reserved for use by the controller, so the amount of
memory available is less than the controller actually has installed. For example, the
9690SA controller has 512 MB of memory, of which 448 MB is available.