4 vlan port configuration – PLANET WGSD-10020 User Manual

Page 112

Advertising
background image

User’s Manual of WGSD-10020 Series

Current number of

VLANs

Display the current number of VLANs

VLAN Learning

Display the VLAN learning mode. The Managed Switch supports IVL (IVL

Independent vlan learning).

Configurable PVID

Tagging

Indicates whether or not configurable PVID tagging is implemented.

4.6.4 VLAN Port Configuration

This page is used for configuring the Managed Switch port VLAN. The VLAN per Port Configuration page contains fields for

managing ports that are part of a VLAN. The port default VLAN ID (PVID) is configured on the VLAN Port Configuration page. All

untagged packets arriving to the device are tagged by the ports PVID.

Understand nomenclature of the Switch

IEEE 802.1Q Tagged and Untagged

Every port on an 802.1Q compliant switch can be configured as tagged or untagged.

Tagged:

Ports with tagging enabled will put the VID number, priority and other VLAN information into the

header of all packets that flow into those ports. If a packet has previously been tagged, the port

will not alter the packet, thus keeping the VLAN information intact. The VLAN information in the

tag can then be used by other 802.1Q compliant devices on the network to make

packet-forwarding decisions.

Untagged:

Ports with untagging enabled will strip the 802.1Q tag from all packets that flow into those

ports. If the packet doesn't have an 802.1Q VLAN tag, the port will not alter the packet. Thus,

all packets received by and forwarded by an untagging port will have no 802.1Q VLAN

information. (Remember that the PVID is only used internally within the Switch). Untagging is

used to send packets from an 802.1Q-compliant network device to a non-compliant network

device.

Frame Income

Frame Leave

Income Frame is tagged

Income Frame is untagged

Leave port is tagged

Frame remains tagged

Tag is inserted

Leave port is untagged

Tag is removed

Frame remain untagged

Table 4-6-1

Ingress/Egress port with VLAN VID Tag/Untag table

IEEE 802.1Q Tunneling (Q-in-Q)

IEEE 802.1Q Tunneling (QinQ) is designed for service providers carrying traffic for multiple customers across their networks.

112

Advertising
This manual is related to the following products: