PLANET WGSD-10020 - Manual (Page 491)

User’s Manual of WGSD-10020 Series
<qce_id> : QCE ID (1-256), default: Next available ID
Default Setting:
disable
Example:
Enable multicast storm control in 2fps
WGSD-10020HP:/> QoS Storm multicast enable 2
QoS QCL Lookup
Description:
Lookup QoS Control List.
Syntax:
QoS QCL Lookup [<qce_id>]
Parameters:
<qce_id> : QCE ID (1-256), default: Next available ID
Default Setting:
disable
Example:
Enable multicast storm control in 2fps
WGSD-10020HP:/> QoS Storm multicast enable 2
QoS QCL Status
Description:
Show QCL status. This can be used to display if there is any conflict in QCE for differnet user types.
Syntax:
QoS QCL status [combined|static|voice_vlan|conflicts]
Parameters:
combined|static|voice_vlan|conflicts: combined : Shows the combined status
491