PLANET WGSD-10020 - Manual (Page 210)

User’s Manual of WGSD-10020 Series
No : IPv4 frames where the options flag is set must not be able to match this
entry.
Yes : IPv4 frames where the options flag is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 SIP Filter Specify the source IP filter for this ACE.
Any : No source IP filter is specified. (Source IP filter is "don't-care".)
Host : Source IP filter is set to Host. Specify the source IP address in the SIP
Address field that appears.
Network : Source IP filter is set to Network. Specify the source IP address and
source IP mask in the SIP Address and SIP Mask fields that appear.
 SIP Address When "Host" or "Network" is selected for the source IP filter, you can enter a
specific SIP address in dotted decimal notation.
 SIP Mask When "Network" is selected for the source IP filter, you can enter a specific SIP
mask in dotted decimal notation.
 DIP Filter Specify the destination IP filter for this ACE.
Any : No destination IP filter is specified. (Destination IP filter is "don't-care".)
Host : Destination IP filter is set to Host. Specify the destination IP address in the
DIP Address field that appears.
Network : Destination IP filter is set to Network. Specify the destination IP
address and destination IP mask in the DIP Address and DIP Mask fields that
appear.
 DIP Address When "Host" or "Network" is selected for the destination IP filter, you can enter a
specific DIP address in dotted decimal notation.
 DIP Mask When "Network" is selected for the destination IP filter, you can enter a specific
DIP mask in dotted decimal notation.
 ICMP Parameters
Object Description

ICMP Type Filter Specify the ICMP filter for this ACE.
Any : No ICMP filter is specified (ICMP filter status is "don't-care").
Specific : If you want to filter a specific ICMP filter with this ACE, you can enter a
specific ICMP value. A field for entering an ICMP value appears.

ICMP Type Value When "Specific" is selected for the ICMP filter, you can enter a specific ICMP
value. The allowed range is 0 to 255. A frame that hits this ACE matches this
ICMP value.

ICMP Code Filter Specify the ICMP code filter for this ACE.
Any : No ICMP code filter is specified (ICMP code filter status is "don't-care").
Specific : If you want to filter a specific ICMP code filter with this ACE, you can
enter a specific ICMP code value. A field for entering an ICMP code value
210