PLANET WGSD-10020 - Manual (Page 95)

User’s Manual of WGSD-10020 Series
4.4.5 SFP Information
You can check the physical or operational status of an SFP module via the SFP Module Information page. This page shows the
operational status, such as the transceiver type, speed, and wavelength and supports distance of SFP module on a specific
interface. You can also use the hyperlink of port no. to check the statistics on a speficic interface. The SFP Module Information
screen in Figure 4-4-5 appears.
Figure 4-4-5 SFP Module Information for Switch page screenshot
The page includes the following fields:
Object Description
 Type Display the type of current SFP module, the possible types are:

1000Base-SX

1000Base-LX

100Base-FX
 Speed Display the spedd of current SFP module, the speed value or description is get
from the SFP module. Different vendors SFP modules might shows different
speed information.
 Wave Length(nm) Display the wavelength of current SFP module, the wavelength value is get from
the SFP module. Use this column to check if the wavelength values of two nodes
are the matched while the fiber connection is failed.
 Distance(m) Display the supports distance of current SFP module, the distance value is get
from the SFP module.
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
95