PLANET WGSD-10020 - Manual (Page 309)

User’s Manual of WGSD-10020 Series
Class Usage Range of maximum power used by the PD Class Dsecription
0 Default 0.44 to 12.95 Watts Classification unimplement
1 Optional 0.44 to 3.84 Watts Very low power
2 Optional 3.84 to 6.49 Watts Low power
3 Optional 6.49 to 12.95 Watts (or to 15.4Watts) Mid power
4 Optional 12.95 to 25.50 Watts (or to 30.8Watts) High power
Table 4-16-1 Device class
4.16.3 Port Configuration
This section allows the user to inspect and configure the current PoE port settings ; screen in Figure 4-16-3 appears.
Figure 4-16-3 Power over Ethernet Configuration screenshot
The page includes the following fields:
Object Description
 PoE Mode There are three modes for PoE mode.
Enable : enable PoE function..
Disable : disable PoE function.
Schedule : enable PoE function in schedule mode.
 Schedule Indicates the schedule profile mode. Possible porifles are:
Profile1
Profile2
Profile3
Profile4
 AF/AT Mode Allows user to select 802.3at or 802.3af compatibility mode. The default vaule is
802.3at mode. This function wil affect PoE power reservation on Classification
power limit mode only, as 802.3af mode, system is going to reserve 15.4W
maximum for PD that supported Class3 level. As IEEE 802.3at mode, system is
going to reserve 30.8Watts for PD that support Class4 level. From class1 to
309