Lldpmed port policy – PLANET WGSD-10020 User Manual

Page 460

Advertising
background image

User’s Manual of WGSD-10020 Series

visitors with their own IP Telephony handsets and other similar appliances supporting

interactive voice services.

guest_voice_signaling

: Guest Voice Signaling (conditional) for use in network topologies that require a different policy

for the guest voice signaling than for the guest voice media.

softphone_voice

: Softphone Voice for use by softphone applications on typical data centric devices, such as

PCs or laptops. This class of endpoints frequently does not support multiple VLANs, if at

all,and are typically configured to use an untagged VLAN or a single tagged data specific

VLAN.

video_conferencing

: Video Conferencing for use by dedicated Video Conferencing equipment and other similar

appliances supporting real-time interactive video/audio services.

streaming_video

: Streaming Video for use by broadcast or multicast based video content distribution and other

similar applications supporting streaming video services that require specific network policy

treatment. Video applications relying on TCP with buffering would not be an intended use of

this application type.

video_signaling

: Video Signaling (conditional) for use in network topologies that require a separate policy for

the video signaling than for the video media.

tagged

: The device is using tagged frames

unragged

: The device is using untagged frames

<vlan_id>

: VLAN id

<l2_priority>

: This field may specify one of eight priority levels (0 through 7), as defined by IEEE 802.1D-2004 [3].

<dscp>

: This field shall contain the DSCP value to be used to provide Diffserv node behavior for the specified

application type as defined in IETF RFC 2474 [5]. This 6 bit field may contain one of 64 code point values

(0 through 63). A value of 0 represents use of the default DSCP value as defined in RFC 2475.

LLDPMED Port Policy

Description:

Set or show LLDP-MED port polcies.

Syntax:

LLDPMED port policies [<port_list>] [<policy_list>]

Parameters:

<port_list>

: Port list or 'all', default: All ports

<policy_list>

: List of policies to delete

460

Advertising
This manual is related to the following products: