PLANET WGSD-10020 User Manual
Page 207
User’s Manual of WGSD-10020 Series
DMAC Value
When "Specific" is selected for the DMAC filter, you can enter a specific destination
MAC address. The legal format is "xx-xx-xx-xx-xx-xx". A frame that hits this ACE
matches this DMAC value.
VLAN Parameters
Object
Description
802.1Q Tagged
Specify whether frames can hit the action according to the 802.1Q tagged. The
allowed values are:
Any
: Any value is allowed ("don't-care").
Enabled
: Tagged frame only.
Disabled
: Untagged frame only.
The default value is "Any".
VLAN ID Filter
Specify the VLAN ID filter for this ACE.
Any
: No VLAN ID filter is specified. (VLAN ID filter status is "don't-care".)
Specific
: If you want to filter a specific VLAN ID with this ACE, choose this value.
A field for entering a VLAN ID number appears.
VLAN ID
When "Specific" is selected for the VLAN ID filter, you can enter a specific VLAN
ID number. The allowed range is 1 to 4095. A frame that hits this ACE matches
this VLAN ID value.
Tag Priority
Specify the tag priority for this ACE. A frame that hits this ACE matches this tag
priority. The allowed number range is 0 to 7. The value Any means that no tag
priority is specified (tag priority is "don't-care".)
ARP Parameters
The ARP parameters can be configured when Frame Type "ARP" is selected.
Object
Description
ARP/RARP
Specify the available ARP/RARP opcode (OP) flag for this ACE.
Any
: No ARP/RARP OP flag is specified. (OP is "don't-care".)
ARP
: Frame must have ARP/RARP opcode set to ARP.
RARP
: Frame must have ARP/RARP opcode set to RARP.
Other
: Frame has unknown ARP/RARP Opcode flag.
Request/Reply
Specify the available ARP/RARP opcode (OP) flag for this ACE.
Any
: No ARP/RARP OP flag is specified. (OP is "don't-care".)
Request
: Frame must have ARP Request or RARP Request OP flag set.
Reply
: Frame must have ARP Reply or RARP Reply OP flag.
Sender IP Filter
Specify the sender IP filter for this ACE.
Any
: No sender IP filter is specified. (Sender IP filter is "don't-care".)
207