PLANET WGSD-10020 - Manual (Page 383)

User’s Manual of WGSD-10020 Series
Parameters:
<retries> : SNMP trap inform retransmited times (0-255)
(default: Show SNMP trap inform retry times)
Default Setting:
5
Example:
Set SNMP trap inform retry times in 10.
WGSD-10020HP:/>security switch snmp trap inform retry times 10
Security Switch SNMP Trap Probe Security Engine ID
Description:
Show SNMP trap security engine ID probe mode.
Syntax:
Security Switch SNMP Trap Probe Security Engine ID [enable|disable]
Parameters:
enable : Enable SNMP trap security engine ID probe
disable : Disable SNMP trap security engine ID probe
(default: Show SNMP trap security engine ID probe mode)
Default Setting:
enable
Example:
Disable SNMP trap probe security engine ID
WGSD-10020HP:/>security switch snmp trap probe security engine id disable
Security Switch SNMP Trap Security Engine ID
Description:
Set or show SNMP trap security engine ID.
383