PLANET WGSD-10020 - Manual (Page 81)

User’s Manual of WGSD-10020 Series
representing multiple 16-bit groups of contiguous zeros; but it can only appear
once. It also used a following legally IPv4 address. For example, '::192.1.2.34'.

Trap Authentication
Failure
Indicates the SNMP entity is permitted to generate authentication failure traps.
Possible modes are:
Enabled : Enable SNMP trap authentication failure.
Disabled : Disable SNMP trap authentication failure.
 Trap Link-up and
Link-down
Indicates the SNMP trap link-up and link-down mode operation. Possible modes
are:
Enabled : Enable SNMP trap link-up and link-down mode operation.
Disabled : Disable SNMP trap link-up and link-down mode operation.
 Trap Inform Mode Indicates the SNMP trap inform mode operation. Possible modes are:
Enabled : Enable SNMP trap inform mode operation.
Disabled : Disable SNMP trap inform mode operation.
 Trap Inform Timeout
(seconds)
Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147.
 Trap Inform Retry
Times
Indicates the SNMP trap inform retry times. The allowed range is 0 to 255.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.3.3 SNMP System Information
The switch system information is provided here. The SNMP System Information screen in Figure 4-3-3 appears.
Figure 4-3-3 System Information Configuration page screenshot
The page includes the following fields:
Object Description
81