PLANET WGSD-10020 - Manual (Page 159)

User’s Manual of WGSD-10020 Series
 Fast Leave Enable the fast leave on the port.
 Throtting Enable to limit the number of multicast groups to which a switch port can belong.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.8.3 IGMP Snooping VLAN Configuration
Each page shows up to 99 entries from the VLAN table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the VLAN Table. The first displayed will be
the one with the lowest VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table. The IGMP Snooping VLAN Configuration
screen in Figure 4-8-6 appears.
Figure 4-8-6 IGMP Snooping VLAN Configuration page screenshot
The page includes the following fields:
Object Description

VLAN ID The VLAN ID of the entry.
 IGMP Snooping Enable Enable the per-VLAN IGMP Snooping. Only up to 64 VLANs can be selected.
 IGMP Querier Enable the IGMP Querier in the VLAN.
 RV Robustness Variable. The Robustness Variable allows tuning for the expected
packet loss on a network. The allowed range is 1 to 255, default robustness
variable value is 2.
 QI Query Interval. The Query Interval is the interval between General Queries sent
159