PLANET WGSD-10020 - Manual (Page 170)

User’s Manual of WGSD-10020 Series
4.8.12 MLD Group Information
Entries in the MLD Group Table are shown on this page. The MLD Group Table is sorted first by VLAN ID, and then by group.
Each page shows up to 99 entries from the MLD Group table, default being 20, selected through the "entries per page" input
field. When first visited, the web page will show the first 20 entries from the beginning of the MLD Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD Group Table.
The MLD Groups Informatino screen in Figure 4-8-15 appears.
Figure 4-8-15 MLD Snooping Groups Information page screenshot
The page includes the following fields:
Object Description

VLAN ID VLAN ID of the group.
 Groups Group address of the group displayed.
 Port Members Ports under this group.
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
: Updates the table, starting with the first entry in the IGMP Group Table.
: Updates the table, starting with the entry after the last entry currently displayed.
4.8.13 MLDv2 Information
Entries in the MLD SSM Information Table are shown on this page. The MLD SSM Information Table is sorted first by VLAN ID,
then by group, and then by Port No. Diffrent source addresses belong to the same group are treated as single entry.
Each page shows up to 64 entries from the MLD SSM (Source Specific Multicast) Information table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first 20 entries from the beginning of the
MLD SSM Information Table.’
170