Connecting via nfc when camera is in playback mode, Sending to a smartphone assigned to the button, Button (= 136) – Canon PowerShot G3 X User Manual
Page 136: 136). note that only one
136
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
●
If during connection a message on the camera requests you to
enter the nickname, follow step 2 in “Sending Images to an NFC-
Compatible Smartphone” (= 134) to enter it.
●
The camera does not keep a record of smartphones you connect
to via NFC in Playback mode.
●
You can preset images to transfer at your desired size (= 151).
Sending to a Smartphone Assigned to the
Button
Once you have connected to a smartphone initially by pressing the [ ]
button, you can simply press the [ ] button after that to connect again for
viewing and saving camera images on your connected device.
These steps show how to use the camera as an access point, but you can
also use an existing access point (= 139).
1
Install Camera Connect.
z
For an iPhone or iPad, find Camera
Connect in the App Store and download
and install the app.
z
For Android smartphones, find Camera
Connect in Google Play and download
and install the app.
2
Press the [ ] button.
z
Press the [ ] button.
z
If the [Device Nickname] screen is
displayed, press the [ ][ ] buttons or
turn the [ ] dial to choose [OK], and then
press the [ ] button.
●
Connections require that a memory card be in the camera.
●
You can also change the camera nickname on the screen in
step 2 (= 134).
●
Not all NFC-compatible smartphones have an N-Mark ( ). For
details, refer to the smartphone user manual.
●
You can also send multiple images at once and change the image
size before sending (= 151).
●
To disable NFC connections, choose MENU (= 31) ► [ 4] tab
► [Wi-Fi Settings] ► [NFC] ► [Off].
Connecting via NFC When Camera Is in Playback Mode
z
Press the [
] button to turn the camera
on.
z
Touch the smartphone with Camera
Connect installed (= 134) against the
camera’s N-Mark ( ).
z
Press the [ ][ ][ ][ ] buttons to choose
an image to send, and then press the [ ]
button. [ ] is displayed.
z
To cancel selection, press the [ ] button
again. [ ] is no longer displayed.
z
Repeat this process to choose additional
images.
z
After you finish choosing images, press
the [
] button.
z
Press the [ ][ ] buttons or turn the [ ]
dial to choose [OK], and then press the
[ ] button.
z
Press the [ ][ ] buttons to choose
[Send], and then press the [ ] button.
z
The images are now sent. The
connection is ended automatically after
the image is sent.