Canon PowerShot G3 X - Manual (Page 22)

22
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Advanced Guide
Basic Guide
Display Language
Change the display language as needed.
1
Enter Playback mode.
z Press the [ ] button.
2
Access the setting screen.
z Press and hold the [ ] button, and then
immediately press the [ ] button.
3
Set the display language.
z Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose a language, and
then press the [ ] button.
z Once the display language has been set,
the setting screen is no longer displayed.
● The current time is displayed if you wait too long in step 2 after
pressing the [ ] button before you press the [
] button.
In this case, press the [ ] button to dismiss the time display and
repeat step 2.
● You can also change the display language by pressing the
[
] button and choosing [Language ] on the [ 3] tab.
● You can also set the display language by touching a language on
the screen in step 3 and then touching it again.
3
Change the date and time.
z Follow step 2 in “Setting the Date and
Time” (= 21) to adjust the settings.
z Press the [ ] button to close the
menu screen.
● Date/time settings can be retained for about 3 weeks by the
camera’s built-in date/time battery (backup battery) after the
battery pack is removed.
● The date/time battery will be charged in about 4 hours once you
insert a charged battery pack or connect the camera to an AC
adapter kit (sold separately, = 168), even if the camera is left
off.
● Once the date/time battery is depleted, the [Date/Time] screen will
be displayed when you turn the camera on. Set the correct date
and time as described in “Setting the Date and Time” (= 21).