Canon PowerShot G3 X - Manual (Page 74)

74
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Shooting Still Images during Movie Recording
Still Images Movies
Shoot still images during movie recording as follows.
1
While shooting a movie, focus on a
subject.
z Make sure that [ ] is displayed, and
then press the shutter button halfway.
z Focus and exposure are now readjusted.
(However, the camera does not beep.)
z Movie recording will continue.
2
Shoot.
z Press the shutter button all the way
down.
z Your shot will be recorded.
● Shooting still images during movie recording may not be possible
when the memory card’s recording speed is slow, or when there is
not enough free internal memory.
- [ ] (blinking): Image processing for recording is in progress.
You can shoot when the icon stops blinking.
- [ ]: Still images cannot be shot.
In [ ] mode, [ ] is displayed during movie recording, and still
images cannot be shot.
● When still images are captured during movie recording, the still
image and shutter sound are included in the movie.
● The flash does not fire.
● Movie recording may stop if shooting still images fills up the
internal memory.
Recording Various Movies
Recording Movies in [ ] Mode
Still Images Movies
1
Enter [ ] mode.
z Set the mode dial to [ ].
z Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (= 30).
z Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
2
Configure the settings to suit the
movie (= 195).
3
Shoot.
z Press the movie button.
z To stop movie recording, press the movie
button again.
● You can also choose the shooting mode by accessing MENU
(= 31) ► [
1] tab ► [Rec. Mode].
● Focus can be adjusted during recording by touching [ ] and
turning the [ ] ring while [
] is displayed.