Adjusting the constant face display size – Canon PowerShot G3 X User Manual
Page 44
44
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Easily Reacquiring Subjects with Auto
Zooming (Seek Assist)
Still Images
Movies
If you lose track of a subject while zoomed in and move the camera to
look for it, the camera detects this movement and automatically zooms
out, which makes it easier to find the subject.
1
Enter [ ] Auto mode (= 43).
2
Look for the lost subject.
z
When you move the camera to look for
the subject, the camera zooms out to
help you find it.
3
Reacquire the subject.
z
Once you find the subject and stop
moving the camera, the camera zooms
in again.
4
Shoot.
z
To cancel this mode, press the [ ]
button again. [ Auto: Off] is displayed.
Adjusting the Constant Face Display Size
z
When Auto is on, press the [ ][ ]
buttons or turn the [
] dial to choose
the desired option.
z
The camera zooms automatically to keep
faces at the specified size.
Auto
Auto zoom to prevent subjects from moving off the
screen.
When multiple faces are detected, the camera zooms to
keep these subjects on the screen.
Face
Keep faces large enough to show facial expressions
clearly.
Upper Body
Keep faces small enough to show the person’s upper
body.
Whole Body
Keep faces small enough to show the person’s entire
body.
Manual
Keep faces at the size specified by moving the zoom
lever. Release the zoom lever once the desired size
has been obtained.
●
The face size can also be adjusted in MENU (= 31) ► [
7]
tab ► [
Auto Settings] ► [
Auto Zoom]. You can choose
[Off] to deactivate this feature and use only the feature described
in “Easily Reacquiring Subjects with Auto Zooming (Seek Assist)”
(= 44).
●
You can zoom in or out with the zoom lever when [Face], [Upper
Body], or [Whole Body] is selected, but the original zoom factor
will be restored in a few seconds after you release the lever.
●
You can clear your specified face size during movie recording by
pressing the [
] button.
●
When
Auto is on, you can also choose options by touching
[ ][ ].