Canon imagePROGRAF GP-300 - Manual (Page 112)

Note
• If the Home screen does not appear, press the HOME button. •
2. Tap Paper settings . 2.
3. Tap Advanced . 3.
4. Tap Cutting mode . 4.
5. Tap User cut . 5.
6. When Do you want to set to detect the leading edge of the paper? is displayed, select 6.
Detect (recommended) .
7. Print the job. 7.
The printer stops advancing the paper after printing.
8. Tap Advance paper . 8.
Roll paper is fed to the specified cut position and then automatically stopped.
9. Cut the roll paper manually with scissors or the like. 9.
10. Tap OK . 10.
After the roll is rewound, it stops automatically.
Paper cutting (to have the roll cut at your specified position)
1. Tap Feed/Cut on Home screen of operation panel. 1.
112