Canon imagePROGRAF GP-300 - Manual (Page 184)

Other printer settings
This setting item is displayed by tapping Printer settings after tapping ( Setup ) on the HOME
screen.
Important
• The administrator password is required to change settings if it is enabled for changing settings using the
operation panel.
• Energy saving settings •
To save electricity, enable this setting to turn off the printer automatically or to enter sleep mode when
specified length of time has elapsed.
◦ Auto power off ◦
Sets the time until the printer turns off automatically. If no operations are performed on the printer for
the specified duration of the time after entering Sleep mode, the printer automatically turns off.
◦ Sleep timer ◦
Specifies the length of time to enter sleep mode automatically when no operation is made.
Note
If the print job contains a pending job or a security print job, the printer does not enter sleep
mode.
• Use USB connection •
Use / Do not use USB connection.
• Date/time settings •
Sets the current date and time.
• Date display format •
Sets the format of dates displayed on the touch screen and printed on photos.
• Time zone (GMT) •
Specifies the time zone according to a country or region you live in.
Specifying the time zone allows you to display the correct time and date an e-mail was sent on your mail
software.
Select the time difference from GMT (Greenwich mean time) according to a country or region you live in.
• Sound control •
Select whether to sound / not sound for key touch sound and alarm sound.
• Length unit settings •
Selects the length unit (meter or feet/inch).
184