Canon imagePROGRAF GP-300 - Manual (Page 171)

IPv6 DNS host name XXXXXXXXXXXX
IPv6 DNS domain name XXXXXXXXXXXX
MAC address XX:XX:XX:XX:XX:XX (12 characters)
IPsec settings Enable (ESP) / Enable (ESP & AH) / Enable (AH) /
Disable
Printer name XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
("XX" represents alphanumeric characters.)
To change the setting, tap Settings .
◦ Enable/disable Wired LAN ◦
Select Enable when connecting to wired LAN.
Note
• By tapping Advanced , you can set LAN in detail. •
For the items that can be set, see the following.
Advanced
• Print details •
Prints out the LAN setting information of the printer with Wi-Fi connection, wired LAN connection,
wireless direct connection.
For the items that can be checked, see the following.
Printing Network Settings
Important
• Important information on your computer is stated on the paper on which the LAN setting information
is printed. Please handle with care enough.
Note
• You can also print out the LAN setting information by tapping in the following order. •
( Setup ) > Printer settings > Test print > Print LAN details
• Advanced •
By tapping Advanced on each setting screen of Wi-Fi connection, wired LAN connection, wireless direct
connection, LAN information can be set in detail.
Important
• If the LAN is disabled, the following items can not be selected.
171