Canon imagePROGRAF GP-300 - Manual (Page 87)

Loading Rolls in the Printer
Follow these steps to load rolls in the printer.
Important
• Before loading a roll, confirm whether the inside of the top cover or the output guide is soiled. If these •
areas are dirty, we recommend cleaning them in advance. (See " Cleaning Inside the Top Cover .")
1. Tap Load paper or Replace paper on the Home screen of the operation panel. 1.
Note
• If the Home screen does not appear, tap the HOME button. •
2. Tap Load roll paper . 2.
Note
• If any paper has been advanced that will not be used, a message is shown requesting you to •
remove it.
After following the instructions on the screen to remove the paper, go to the next step.
3. Positioning your hands as shown, open the roll paper cover. 3.
87