Auto maintenance settings – Canon imagePROGRAF GP-300 User Manual
Page 180
Auto maintenance settings
This setting item is displayed by tapping
Printer settings
after tapping
(
Setup
) on the HOME
screen.
Important
• The administrator password is required to change settings if it is enabled for changing settings using the
operation panel.
•
Auto nozzle check
•
Enables/Disables automatic nozzle checking. You can also select the page interval to perform automatic
nozzle checking.
•
Nozzle check error display
•
Enables/Disables displaying the nozzle check error.
•
System Cleaning frequency
•
Specifies the frequency of automatic system cleaning.
Note
• To maintain print quality, we recommend you select
Short
if you use the printer at a higher place.
•
Print pattern after new head
•
Selects whether you print an adjustment pattern after replacing the Print head.
180