Canon imagePROGRAF GP-300 - Manual (Page 777)

4113
Cause
Cannot print borderless for the following reasons.
• Printer driver is not set to Fit Roll Paper Width .
• Roll paper is not wide enough, or the paper is out of position.
What to Do
• Stopping printing •
Tap Cancel on the touch screen.
• Replacing paper •
Follow the steps below to replace the printer paper with paper that can be printed borderless.
1. Tap Replace the paper and print on the touch screen, then remove the roll paper. 1.
Removing the Roll from the Printer
2. Replace the printer paper with paper that can be printed borderless. 2.
Loading Rolls in the Printer
• Printing with the loaded paper •
Tap Print with the loaded paper. on the touch screen.
Paper is printed borderless with the document width set slightly smaller than the paper.
777