Canon imagePROGRAF GP-300 - Manual (Page 360)

Space for installation (W x D x
H) Printer only:
Approx. 66.5 x 53.5 x 29.1 in. (1689 x 1358 x 739 mm)
Printer and Stand SD-33 (when opening the basket):
Approx. 66.5 x 57.9 x 53.6 in. (1689 x 1470 x 1360 mm)
GP-200 / GP-5200
Power supply 100-240 V AC (50/60 Hz)
Power consumption When printing: 71 W max. *1
In Sleep mode: 2.0 W max. *1
Standby (all ports connected): 2.1 W max.
When power is off: 0.3 W max. *2
*1 Wired LAN connection
*2 The printer uses a trace amount of power even when turned off. To stop all
power consumption, turn off the printer and unplug the power cord.
Operating environment Temperature: 59 to 86 °F (15 to 30 °C)
Humidity: 10 to 80 % RH (with no condensation)
Dimensions (W x D x H) Printer only:
Approx. 38.7 x 29.5 x 17.3 in. (982 x 748 x 439 mm)
Printer and Stand SD-24 (when opening the basket):
Approx. 38.7 x 34.3 x 41.8 in. (982 x 870 x 1060 mm)
Stand may not be provided depending on the region where the printer is
purchased.
Weight Printer only (without print head and ink tanks):
Approx. 91 lb (41 kg)
Printer and Stand SD-24 (without print head and ink tanks):
Approx. 110 lb (50 kg)
Space for installation (W x D x
H) Printer only:
Approx. 54.5 x 53.5 x 29.1 in. (1382 x 1358 x 739 mm)
Printer and Stand SD-24 (when opening the basket):
Approx. 54.5 x 57.9 x 53.6 in. (1382 x 1470 x 1360 mm)
Printing performance
Print method Bubblejet
Maximum resolution 2400 dpi (horizontally) * x 1200 dpi (vertically)
* Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Print head PF-07
360