Canon imagePROGRAF GP-300 - Manual (Page 173)

◦ LLMNR ◦
Specifies ON/OFF of LLMNR (Link-Local Multicast Name Resolution). Selecting ON allows the
printer to detect printer's IP address from the printer name without a DNS server.
◦ Gigabit Ethernet settings ◦
Specifies the communication speed and communication method when using Gigabit Ethernet.
◦ Use Dedicated Port ◦
Selects whether to use a dedicated port for a command sent from a Canon application to the printer.
Selecting ON allows you to use the dedicated port.
◦ IPP settings ◦
Selecting Enable allows you to print via the network with the IPP protocol.
If you use the security print function when printing using IPP protocol in AirPrint etc., select Enable
for Security Print .
◦ Wi-Fi DRX settings ◦
Selecting Enable allows you to activate discontinuous reception when using Wi-Fi.
◦ Wired LAN DRX settings ◦
Selecting Enable allows you to activate discontinuous reception when the printer is connected to a
device compatible with wired LAN.
◦ Reset SSL certificates ◦
Initializes SSL certificate information.
◦ Reset LAN settings ◦
Initializes the network settings on the printer.
After resetting, perform setup again as necessary.
173