Cause, What to do – Canon imagePROGRAF GP-300 User Manual
Page 788
4910
Cause
The width of the roll paper set in
Fit Roll Paper Width
in the printer driver is not the same as the width of
the roll paper loaded in the printer.
What to Do
Tap
OK
on the touch screen to go to the next screen.
Check the media type and size that appear and tap
OK
.
•
Stopping printing
•
Tap
Cancel
on the touch screen or press the
Stop
button.
•
Replacing the roll paper
•
Follow the steps below to replace the paper with roll paper of the width set in the printer driver.
1. Tap
Replace the paper and print
, then remove the roll paper.
1.
Removing the Roll from the Printer
2. Replace the paper with paper of the width set in the printer driver.
2.
Printing begins.
•
Printing without changes
•
Tap
Print with the loaded paper.
.
However, note that this error may cause paper jams and affect the printing quality.
Note
• To change print settings in Windows, select
Fit Roll Paper Width
in the printer driver and set the roll
paper width in the dialog box that appears.
• To change print settings in macOS, open the printer driver and select
Fit Roll Paper Width
, and then
set the roll paper width in that panel to the width of the paper loaded in the printer.
788