Canon imagePROGRAF GP-300 User Manual

Page 172

Advertising
background image

◦

Set printer name

◦

Specifies the printer name. You can use up to 15 characters for the name.

Note

• You cannot use the same printer name as that already used for other LAN connected devices.
• You cannot use a hyphen for the initial or last character of the printer name.

◦

TCP/IP settings

◦

Performs IPv4 or IPv6 setting.

◦

WSD settings

◦

Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows
8.1, and Windows 7).

▪

Enable/disable WSD

▪

Selects whether WSD is enabled or disabled.

Note

• When this setting is enabled, the printer icon is displayed on the Network Explorer in

Windows 10, Windows 8.1, and Windows 7.

▪

Optimize inbound WSD

▪

Selecting

Enable

allows you to receive the WSD printing data faster.

▪

Timeout settings

▪

Specifies the timeout length.

◦

Bonjour settings

◦

Setting items for LAN using Bonjour.

▪

Enable/disable Bonjour

▪

Selecting

Enable

allows you to use Bonjour to perform the network settings.

▪

Service name

▪

Specifies the Bonjour service name. You can use up to 48 characters for the name.

Note

• You cannot use the same service name as that already used for other LAN connected

devices.

◦

SNTP settings

◦

Performs various settings for SNTP (Simple Network Time Protocol).

◦

Spanning tree settings

◦

Enables/Disables spanning tree. Selecting

Enable

avoids circulating data on a network.

◦

LPR protocol settings

◦

Enables/Disables the LPR setting.

◦

RAW protocol

◦

Enables/Disables RAW printing.

172

Advertising