Canon imagePROGRAF GP-300 - Manual (Page 203)

LAN settings
• Wi-Fi •
Enables/Disables Wi-Fi.
• Wireless Direct •
Enables/Disables Wireless Direct.
• Wired LAN •
Enables/Disables Wired LAN.
• Confirm LAN settings •
The LAN setting information is displayed.
• Advanced setup •
◦ Set printer name ◦
Specifies the printer name. You can use 2 to 15 characters for the name.
Note
• You cannot use the same printer name as that already used for other LAN connected devices.
• You cannot use a hyphen for the initial or last character of the printer name.
◦ TCP/IP settings ◦
Performs IPv4 or IPv6 setting.
◦ WSD settings ◦
Perform settings to use WSD.
◦ Bonjour settings ◦
Perform settings to use Bonjour.
◦ LPD print ◦
Perform settings for printing with LPD.
◦ SNMP settings ◦
Perform settings for using SNMP to manage and control the printer.
◦ SNTP settings ◦
Perform settings for using SNTP to adjust the time on the printer.
◦ FTP settings ◦
Perform settings for printing with FTP.
◦ IPP Settings ◦
Perform settings for printing with IPP.
◦ CHMP settings ◦
Perform settings for communication at the time when printer drivers or applications acquire the
information on status, paper, and job log, from the printer.
203