Firmware update – Canon imagePROGRAF GP-300 User Manual
Page 357
Firmware update
Important
• When you use this function, make sure the printer is connected to the Internet.
• The administrator password is required to change settings if it is enabled for changing settings using the
operation panel.
Using Operation Panel
1.
Tap
(
Setup
) on HOME screen.
1.
2.
Tap
Printer settings
.
2.
3.
Tap
Firmware update
.
3.
If an administrator password is set, enter the password.
4.
Tap
Install update
.
4.
5.
Tap
Yes
.
5.
6.
Confirm displayed message and tap
Start update
.
6.
Using Remote UI
1.
Start up Remote UI.
1.
2.
Select
Firmware update
.
2.
3.
Select
Install update
.
3.
4.
Confirm displayed message and select
Update
.
4.
Note
• If the firmware update is not complete, check the following and take an appropriate action.
•
Check the network settings such as a wireless router.
If
Cannot connect to the server.
is displayed on the touch screen, select
OK
and try again
after a while.
357