Canon imagePROGRAF GP-300 - Manual (Page 169)

IPv4 DNS dynamic settings Enable / Disable
IPv4 DNS host name XXXXXXXXXXXX
IPv4 DNS domain name XXXXXXXXXXXX
IPv6 link-local address XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 link-local prefix length XXX (up to 3 digits)
MAC address XX:XX:XX:XX:XX:XX (12 characters)
IPsec settings Disable
Printer name XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
*1 means printer's model name
("XX" represents alphanumeric characters.)
To change the setting, tap Settings .
◦ Enable/disable Wireless Direct ◦
Select Enable to wirelessly connect without wireless router.
◦ Update SSID/password ◦
Updates the identifier (SSID) and password.
◦ Wireless Direct network (SSID) ◦
Changes the name (device name) of the printer displayed on Wi-Fi Direct compatible device.
◦ Connection request confirmation ◦
Changes the display / non-display of the confirmation screen when Wi-Fi Direct compatible devices
are connected to the printer.
Note
• By tapping Advanced , you can set LAN in detail. •
For the items that can be set, see the following.
Advanced
• Wired LAN •
The following setting information on the Wired LAN connection is displayed. (Some items are not
displayed depending on printer settings.)
Items Setting
Connection Enabled (connected) / Enabled (disconnected) / Disa-
ble
IPv4 address XXX. XXX. XXX. XXX (12 characters)
IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters)
169