Canon imagePROGRAF GP-300 User Manual
Page 89
5.
Holding the roll holder flange (A), guide the holder along the slide guides (B) on both ends,
5.
keeping the holder level as you load it in the roll holder slot.
Caution
• Do not force the roll holder into the printer with the right and left ends reversed. This may damage
•
the printer and roll holder.
• Do not release the flanges until the holder is loaded in the roll holder slot.
•
• Be careful not to pinch your fingers between the slide guides (B) and the roll holder shaft (C) when
•
loading rolls.
Important
• If the leading edge of the roll paper is cut crooked or folded, it may not be fed correctly. Cut the
•
leading edge of the roll paper with scissors or the like and straighten it.
• Load the roll paper so that it is not loaded in the opposite direction.
•
6.
Insert the edge of the roll in the feed slot (A) and advance the roll until you hear the feed
6.
tone.
89