Canon imagePROGRAF GP-300 User Manual
Page 191
LCD, Remote UI, and other tools
Entering the administrator password is required to change the setting items using the operation
panel of the printer, Remote UI, or some software.
7.
Enter new administrator password.
7.
Important
• The following character restrictions apply to the password:
•
Set the password by using 4 to 32 characters.
The allowed characters are single-byte alphanumeric characters, blank space, umlaut
characters, and the below characters.
- ! @ # $ % ^ & * _ ; : , . / ` = + ' " ( ) { } [ ] < > |
For security reasons, we recommend you use 8 and more alphanumeric characters.
8.
Tap
Apply
.
8.
9.
Enter administrator password you specified again.
9.
10.
Tap
Apply
.
10.
The administrator password is enabled.
When You Want to Disable the Administrator Password:
After tapping
(
Setup
) on HOME screen, select
Printer settings
>
Security settings
>
Administrator password settings
>
Remove administrator password
. Select either item and follow
the on-screen instructions to perform settings.
191