Step 4: connecting to telephone line(p. 104) – Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer User Manual

Page 113

Advertising
background image

●

You can also configure the setting to receive faxes automatically after the machine rings for a certain
period of time. [Switch to Auto RX](P. 502)

4

Press [Apply].

➠

The [Connect Telephone Line] screen is displayed.

Step 4: Connecting to Telephone Line

Use the supplied telephone cord to connect the machine to the telephone line.

When using a telephone, connect it to the machine.

1

Press [Next].

➠

The [Connect to socket on back of device.] screen is displayed.

2

Connect the supplied telephone cord to the telephone line jack (LINE) on the
machine and the telephone line connector on the wall.

Connect a telephone to the external telephone jack (EXT.) on the machine.

●

When connecting a telephone with fax function, be sure to disable the fax auto receive setting on the
telephone.

●

Depending on the type of telephone connected to it, the machine may not be able to send or receive faxes
properly.

3

Press [Next].

➠

The screen confirming that you want to exit the Fax Setup Guide is displayed.

4

Press [Yes].

➠

The settings configured in the Fax Setup Guide are applied, and the type of telephone line is configured
automatically.

If the Type of Telephone Line Is Not Configured Automatically

●

Configure the type of telephone line manually. [Select Line Type](P. 495)
* If you do not know the type of your telephone line, contact your telephone company.

Setting Up

104

Advertising