Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer - Manual (Page 246)

3
Click [Send to E-mail Settings].
➠ The [Send to E-mail Settings] screen is displayed.
If the [Enter Address Book Password] screen appears, enter the PIN, and then click [OK].
4
For [Registration], select a One-Touch number, and enter the name to be displayed in
the Address Book.
Previously registered One-Touch numbers are not displayed.
5
For [Send Destination Settings], enter the e-mail address to be registered.
6
For [SMTP Server Settings], configure the e-mail server information.
[SMTP Server]
Enter the SMTP server name (the host name or IP address) to be used for sending e-mail, using single-byte
alphanumeric characters.
Input example: Host name
smtp.example.com
[SMTP Authentication]
When using SMTP authentication, select [Set], and enter the user name and password for authentication
using single-byte alphanumeric characters.
7
Click [Next] [Register].
8
Restart the machine. Restarting the Machine(P. 113)
➠ The settings are applied.
Scanning
237