Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer User Manual
Page 187
3
In [Host Name], enter the computer name or the IP address of the computer where a shared folder is
located.
* When using a DNS server, you can enter the host name or FQDN instead of the computer name or IP
address.
4
Enter the path to the folder.
Enter the path to the shared folder. Use "\" as a separator.
Input example:
when the shared folder path is C:\users\public\share
users\public\share
If there is no folder at the entered path, a folder with the entered name is created when the file is saved
for the first time.
* However, if there is no parent folder, or you do not have write permission to the parent folder, a
sending error occurs without a folder being created.
5
Enter the user name and password, as needed.
●
If Restrict Access is enabled for the shared folder, enter the user name and password used for
accessing the shared folder.
●
To enter a password, select the [Set Password] checkbox, and then enter the password.
When Registering a Fax Number
1
Enter the name and fax number.
2
Set the fax sending details, as needed.
If a send error occurs or it takes time to send a fax to a registered fax number, set the fax sending details.
[ECM TX] *1
When this is selected and an error occurs for an image being sent, the machine corrects the image so as
not to send a distorted image.
[Speed] *1
If it takes time to start sending a fax, such as when there is a poor phone line connection, the machine
lowers the communication start speed.
[Long Distance]
If a communication error occurs when sending a fax to an international destination, select [International
(1)]. If the error does not improve, select [International (2)] and [International (3)] in that order.
*1
If this is not set here, the setting in [Settings/Registration] [TX Settings] [Fax TX Settings] is applied.
Basic Operations
178