Confirming the destination before sending, Confirming the destination before sending(p. 376) – Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer User Manual

Page 385

Advertising
background image

Confirming the Destination before Sending

8W0J-083

Configure the settings to display a screen confirming the destination before an e-mail or fax is sent. Confirm that there

are no mistakes in the specified destination and entered information to prevent sending by mistake.

Choosing When to Display the Confirmation Screen

●

When specifying a destination with a coded dial number or one-touch dial
When a destination is specified with a coded dial number or one-touch dial, the registered destination and
destination name are displayed on the confirmation screen. When a group is registered to a coded dial
number or one-touch dial, the group name and number of destinations are displayed.

●

When sending an e-mail or fax
When you press

to send an e-mail or fax a screen confirming the destination is displayed. Set whether

to display this only when sending to multiple destinations (Sequential Broadcast) or whenever sending a
fax or e-mail.

●

When entering a fax number using the numeric keys
When you enter a fax number using the numeric keys and press

, a screen appears prompting you to

enter the number again. When you enter a second and subsequent destinations, they are displayed before
the next destination is entered.

This section describes how to configure the settings using Remote UI from a computer.

On the control panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings.

[Common Settings](P. 485) / [Confirm Entered Fax Number](P. 496)

Administrator privileges are required.

1

Log in to Remote UI in System Manager Mode. Starting Remote UI(P. 399)

2

On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P. 401)

3

Click [TX Settings].

➠

The [TX Settings] screen is displayed.

4

Configure the setting so that the screen confirming the destination is displayed.

To display the screen when specifying the destination using a coded dial number or

one-touch dial

1

Click [Common Settings] [Edit].

➠

The [Edit Common Settings] screen is displayed.

2

In [Common Settings], select the [Confirm When Using One-Touch/Coded Dial TX] checkbox.

3

Click [OK].

Security

376

Advertising