Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer - Manual (Page 85)

When Not Using a Security Standard
Select [None] and press .
6
Check the message, and select [Yes] and press .
➠ If the machine is correctly connected to the network, [Connected.] appears.
7
Wait a few minutes.
➠ When the machine is connected to the wireless LAN, [ ] appears on the [Home] screen.
By default, an IP address is set automatically.
To use a specific IP address, set this manually.
Setting IPv4 Addresses(P. 77)
Setting IPv6 Addresses(P. 81)
If an Error Message Appears during Operation and a Connection Cannot Be Established
● Select [Close] and press , check the information of the wireless LAN router to which you want to
connect, and repeat the procedure starting from Step 2.
Setting Up
76