HP 2/8q Fibre Channel - Manual (Page 178)

Command Line Interface
178 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
The following is an example of the Zoneset List command:
2/8q FC Switch #> zoneset list
Current List of ZoneSets
------------------------
alpha
beta
The following is an example of the Zoneset Zones command:
2/8q FC Switch #> zoneset zones ssss
Current List of Zones for ZoneSet: ssss
----------------------------------
zone1
zone2
zone3
Zoning
command
Opens a Zoning Edit session in which to create and manage zone sets and zones. See the
“
Zoning command ” on page 178 and the “ Zoneset command ” on page 176.
Authority
Admin, except for the Active , History , Limits , and List keywords.
Syntax
ZONING
Keywords
ACTIVE
Displays information for the active zone set including component zones and zone
members. This keyword does not require an Admin session.
CANCEL
Closes the current Zoning Edit session. Any unsaved changes are lost.
CLEAR
Clears all inactive zone sets from the volatile edit copy of the zoning database. This
keyword does not affect the non-volatile zoning database. However, if you enter the
Zoning Clear command followed by the Zoning Save command, the
non-volatile zoning database is cleared from the switch.
Note: The preferred method for clearing the zoning database from the switch is the
Reset
Zoning
command.
EDIT
Opens a Zoning Edit session.