HP 2/8q Fibre Channel - Manual (Page 44)

Switch Manager
44 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
Saving the Event Browser to a file
To save the Event Browser to a file:
Note: Filtered events are not saved.
1. Filter and sort the Event Browser to obtain the desired display.
2. Select File > Save As.
3. Select a folder and enter a file name in which to save the event log, and then click Save.
The file can be saved in XML, CSV, or text format. XML files can be opened with an
internet browser or text editor. CSV files can be opened with Microsoft Excel or most
spreadsheet applications.
Active Zoneset data window
The Active Zoneset data window displays the zone membership for the active zone set that
resides on the fabric management switch.
To open the Active Zoneset data window, click the Active Zoneset tab below the data window
in the topology display. See “
Configured Zonesets data windows ” on page 65 for information
about the zone set definitions on a particular switch. See “ Zoning a fabric ” on page 45 for
more information about zone sets and zones.
The Active Zoneset data window ( Figure 15 ) uses display conventions for expanding and
contracting entries that are similar to the fabric tree. An entry handle located to the left of an
entry in the tree indicates that the entry can be expanded. Click this handle or double-click the
following entries:
■ A zone set entry expands to show its member zones.
■ A zone entry expands to show its member port/devices.
■ WWN and FC devices that are zoned, but no longer part of the fabric, are grayed-out.
Figure 15: Active Zoneset data window