MITSUBISHI ELECTRIC J2-JRSERIES MR-J2-03A5 - Manual (Page 100)

6 - 2
6. DISPLAY AND OPERATION
6.2 Status Display
The servo status during operation is shown on the 4-digit, 7-segment LED display. Press the "UP or
"DOWN" button to change display data as desired. When the required data is selected, the corresponding
symbol appears. Press the "SET" button to display its data.
The servo amplifier display shows the lower four digits of 13 data items such as the motor speed.
The following table lists display examples:
Displayed Data
Item Status
Servo amplifier display
Forward rotation at 3000r/min
Motor speed
Reverse rotation at 3000r/min
Lit
Reverse rotation is indicated by the lit decimal points in the upper three
digits.
Load inertia
moment
15.5 times
Value of 0.1 times is shown.
11252pulse
Multi-
revolution
counter
− 12566pulse
Lit
Negative value is indicated by the lit decimal points in the upper three
digits.