MITSUBISHI ELECTRIC J2-JRSERIES MR-J2-03A5 - Manual (Page 150)

12 - 8
12. OPTIONS AND AUXILIARY EQUIPMENT
12.1.3 Servo configurations software
The Servo Configuration software uses the communication function of the servo amplifier to perform
parameter setting changes, graph display, test operation, etc. on a personal computer.
(1) Specifications
Item (Note 1) Description
Communication signal Conforms to RS-232C.
Baudrate 19200bps, 9600bps
(Note 2) Monitor Batch display, high-speed display, graph display
Alarm Alarm display, alarm history, data display at alarm occurrence
Diagnostic
External I/O signal display, no-rotation reason display, cumulative power-on time display,
software number display, motor information display, tuning data display, automatic VC offset
display
Parameters Data setting, list display, change list display, detailed information display
Test operation
Jog operation, positioning operation, motor-less operation, output signal forced output, program
operation in simple language.
File operation Data read, save, print
Others Automatic operation, station setting, help display
Note: 1. On some personal computers, this software may not run properly.
2. Minimum resolution changes with the processing speed of the personal computer.
(2) System configuration
(a) Components
To use this software, the following components are required in addition to the servo amplifier and
servo motor:
Model Description
Personal computer
Which contains a 80386 or higher CPU and on which Windows 3.1/ 95 runs
(80486 or higher recommended).Memory: 8MB or more, hard disk: 1MB or more, serial port used.
OS Windows 3.1/ 95
Display 640 × 400 or more color or 16-scale monochrome display which can be used with Windows 3.1/ 95.
Keyboard Which can be connected to the personal computer.
Mouse Which can be used with Windows 3.1/ 95. Note that a serial mouse is not used.
Printer Which can be used with Windows 3.1/ 95.
Communication cable
MR-JRPC98CBL3Mx MR-JRPCATCBL3M
When these cannot be used, refer to (3) Section 12.1.1 and fabricate.
RS-232C/RS-422
converter
Needed to use the RS-422 multidrop communication function of the servo amplifier.
Note: Windows is a trade mark of Microsoft Corporation.