MITSUBISHI ELECTRIC J2-JRSERIES MR-J2-03A5 - Manual (Page 175)

13 - 19
13. COMMUNICATION FUNCTIONS
13.12.5 Disable/enable of external I/O signals (DIO)
Inputs can be disabled independently of the external I/O signal ON/OFF. When inputs are disabled, the
input signals are recognized as follows. Among the external input signals, EMG, LSP and LSN cannot be
disabled.
Signal Status
External input signals (DI) OFF
External analog input signals 0V
Pulse train inputs None
(1) Disabling/enabling the external input signals (DI), external analog input signals and pulse train inputs
with the exception of EMG, LSP and LSN.
Transmit the following communication commands:
(a) Disable
Command Data No. Data
[9][0] [0][0] 1EA5
(b) Enable
Command Data No. Data
[9][0] [1][0] 1EA5
(2) Disabling/enabling the external output signals (DO)
Transmit the following communication commands:
(a) Disable
Command Data No. Data
[9][0] [0][3] 1EA5
(b) Enable
Command Data No. Data
[9][0] [1][3] 1EA5